Veranda 73013124 Installationsanleitung

Owner's ManualVersion 1.0Elite Rail & Stair Rail& Stair RailAssembly and Installation InstructionsAssembly and Installation InstructionsP

102233442.10: Slide bottom rail over installed brackets, fi tting rail snug to posts. Approximately 1/2" from end of post, pre-drill through rail

11444.6: Attach the bracket to the chassis with supplied #8 x 5/8" self tapping screw in groove in chassis. Repeat on opposite side.4.7: If ang

1255665.1: Slide previously cut top rail over the top of the assembled chassis, fi tting snug to posts.(Make sure bottom stair post is at same angle a

1377Add a fi nal touch by attaching post tops to the posts.Finishing Touches

34106914BOM V1 7/13© 2013 Barrette Outdoor Living • 7830 Freeway Circle • Middleburg Heights, Ohio • 44130http://www.barretteoutdoorliving.com • 1-800

26' Kits Include:(1) Elite Rail Top Rail or Dual Rail(1) Elite Rail Bottom Rail(1) Elite Rail Chassis(2) Elite Rail Baluster Spacers(15) 1-1/8&qu

31122TIP: Precision cuts required to ensure optimum tight installation and fi t.Use chopsaw with thin carbide tip blade to ensure smooth cuts.Pay parti

4333.1: Install lower rail brackets. Position the provided bracket install template on the top of the installed post base trim. Use template to align

5555.1: Plug in top brackets to chassis with "This Side Up" facing up to the top.5.2: Attach the bracket to the chassis with a supplied #8

666776.1: Slide top rail over the top of the assembled “chassis” fi tting snug to posts.7.1: Use wood 2x4 as a template prior to cutting Elite railin

788Note: Make sure posts are at same height as rail installation (with a good, tight installation, post and post sleeve to be cut to 35 13/16" hi

8Top RailBalusterPlugStairStairBracketBase TrimBaluster SpacerBottom RailStair PostStair PostSleevePost TopBaluster SpacerStairBracketChassis6' S

911221.1: Trim Post sleeve to desired length. In most cases, the post and post sleeve at the bottom of the stairs will need to be longer than posts o